动扭传感器＿扭矩传感器＿原厂直供测力传感器＿华研品牌

使用微信扫描二维码分享朋友圈，成交更快更简单！

深圳市华研测控系统工程有限公司生产销售扭矩传感器HY-DN08,
特点和用途 / Features & Applications
将当前测量的扭矩值与转速值实时显示
可直接计算出当前功率值
通信速率可达500或1000次/S
支持电压与电流同时输出
自带OLED显示，分辨率为128*64
可简单标定，清零，滤波等操作
允许200%过载
精度实现了1/1000以上的精度，的零点稳定性


Display the currently measured torque and speed values in real time
Current power values can be calculated directly
Communication rate is up to 500 or 1,000 times / S
Support for voltage and current simultaneous output
Display with OLED, with a resolution of 128 * 64
Simple calibration, zero clearance, filtering and other operations
Allow a 200% overload
Accuracy achieves over 1 / 1000 accuracy with excellent zero point stability

量 程Capacity 0.1~20000N.m
转速量程 Speed Signal ≤15000rpm
转速信号Speed Capacity 120/60/10脉冲/转，4~20mA,0~20mA,0~5V,0~10V
零点输出Zero balance ±2% R.O.
滞 后Hysteresis ±0.5 % R.O.
重 复 性Repeatability ±0.2% R.O.
非 线 性Non-linearity ±0.5% R.O.
蠕变Creep ±0.03% R.O.
零点温漂Temp.effect on zero 0.01 % R.O. / 10ºC
灵敏度温漂
Temp.effect on output 0.01% R.O. / º10C
响应时间
Response time 0.6ms(50%反应）
响应频率
Response frequency 1kHZ
采集速度Acquisition Speed 550/1200次/秒
显示范围Display Range -99999~99999
大扭转角
Maximum torsion angle 2.6*10rad(0.149)
惯性力矩Moment of inertia 0.38kgcm
转子振动固有频率
Natural frequency of rotor vibration 19.4kHZ
扭力常数Torsion constant 3.85*10Nm/rad
材质Materal 不锈钢
年稳定性Stability per yer 0.3%/年
负载电阻Load resistance >2kΩ
推荐激励电压
Recommended excitation  DC24V 0.2A
消耗电流Current Consumption <150mA
工作环境Work Environment - 10 ~ 50 ºC
0~85%RH
安全载荷Safe overload 200% R.C.
电缆线规格Cable Specifications Ø5*3m
线缆及限拉力Cable ultimate pull 10kg