Rohde&schwarzshieldedchambercts-Z12二手屏蔽盒

使用微信扫描二维码分享朋友圈，成交更快更简单！

Rohde & schwarz shielded chamber cts-Z12 二手屏蔽盒
Rohde & schwarz shielded chamber cts-Z12 二手屏蔽盒

Rohde & schwarz shielded chamber cts-Z12

销售/收购/维修、租赁二手仪器设备

手机：/李汉明，曾小姐,308966



Manufacturer: Rohde & Schwarz
Model Number: CRT-Z12
Category: Wireless Test

Rohde & Schwarz - CMW-Z10 - Z11/Z12/Z13/Z14/Z120

Universal RF Shielding Box 6 GHz
Model 1204.7008K02
Unit with options:
Z11 = Antenna Coupler
Z12 = SUB-D Feedthrough
Z13 = USB 2.0 Feedthrough
Z14 = RF feedthrough: Twin N-Connector
Z120 = Additional Handle, rotatable


The R&S CMW-Z10 RF shielding box offers excellent shielding effectiveness and can be used for frequencies up to 6 GHz. This outstanding feature combined with a modular options concept makes the R&S CMW-Z10 indispensable for any radiocommunications tester.
The R&S CMW-Z10 shielding box is made of solid aluminum. It is firmly closed by means of a lever handle with a defined stop. The bottom and cover will not distort under normal conditions. This ensures uniform compression of the sealing cords provided around the entire box – an important prerequisite for effective RF shielding. The cover is lined with absorber material, which minimizes reflections.

Wide frequency range up to 6 GHz:
Both the R&S CMW-Z10 RF shielding box and the R&S CMW-Z11 antenna coupler are suitable for applications up to 6 GHz, thereby covering all common wireless standards such as GSM, UMTS, WLAN, LTE, WiMAX, Bluetooth and GPS.
The R&S CMW-Z10 RF shielding box offers high shielding effectiveness, so that the effects of external interference are reduced to a minimum.

Ultra-low reflections:
The cover of the R&S CMW-Z10 RF shielding box is lined with absorber material in order to minimize reflections. With the R&S CMW-Z10 RF shielding box, the DUT can be positioned anywhere on the R&S CMW-Z11 antenna coupler with virtually no effect on attenuation caused by reflection.

Modular options concept and flexible assignment of modules:
The R&S CMW-Z10 RF shielding box has four module slots for different optional modules. Available options currently include a D-Sub feedthrough (R&S CMW-Z12), a USB feedthrough (R&S CMW-Z13) and a twin N connector (R&S CMW-Z14).
All modules are optimized so that their effect on shielding characteristics is kept to a minimum. The module slots are identical, allowing each module to be inserted into any slot. The optional connectors can thus be flexibly assigned.

Frequency range up to 6 GHz
Ergonomic closing mechanism
Sufficient space for today's tablet PCs

R&S CMW-Z10 RF shielding box and R&S CMW-Z11 antenna coupler:
Shielding effectivness :
Including R&S CMW-Z11, R&S CMW-Z12 and R&S CMW-Z14:
0.4 GHz to 4 GHz: > 80 dB
4 GHz to 6 GHz: > 60 dB
With R&S CMW-Z13 mounted:
0.4 GHz to 4 GHz: > 60 dB
4 GHz to 6 GHz: > 55 dB
Weight: 19.8 lb
Outer dimensions: W × H × D: 12.6 in × 10.5 in × 20.8 in

R&S CMW-Z11 antenna coupler:
VSWR:
VSWR without DUT, with R&S CMW-Z110, R&S CMW-Z10 open:
0.4 GHz to 1.4 GHz < 3.5
1.4 GHz to 3.5 GHz < 2
3.5 GHz to 6 GHz < 3.5

Max. power ratings:
From DUT: +37 dBm
From R&S CMW: +33 dBm
Polarization: circular
Connector: N female

R&S CMW-Z12 D-Sub feedthrough:
Power pins 14 to 18:
Max. current rating: 1 A
Max. rated voltage: 15 V
Cut-off frequency: 1 kHz

Data pins 1 to 13 and 19 to 25:
Max. current rating: 50 mA
Max. rated voltage: 15 V
Max. pass frequency: 5 MHz
Filter shunt capacitance: < 800 pF

R&S CMW-Z13 USB 2.0 feedthrough:
Connector inside antenna coupler: USB-A
Connector outside antenna coupler: USB-B
Power supply:
Max. current rating: 0.5 A
Rated voltage: 5 V

Data rate:
Low speed, full speed, USB 2.0 high speed

R&S CMW-Z14 RF feedthrough:
Connector inside antenna coupler: 2 × N female
Connector outside antenna coupler: 2 × N female
Impedance: 50 ohm
Frequency range: 0 Hz to 6 GHz